HumanTechnik lisa DS-1/RF Instrucciones De Servicio página 11

Congratulations on purchasing your
alarm clock lisa DS-1/RF. We hope it
will provide you with many years of
service. You have chosen a modern
and reliable system.
Please read the operating instruc-
tions through carefully to be able to
start the unit correctly and to fami-
liarise yourself with all of the systems
features.
Standard components
Please check if all following compo-
nents are included:
- lisa DS-1/RF
- 12 V power supply unit
- Operating instructions
- Warranty card
If any parts are missing please imme-
diately contact your dealer or the
manufacturer directly.
Functional principle
The alarm clock lisa DS-1/RF is an
electronic clock with a digital time
display. It wakes you up with an
acoustic signal which is adjustable in
audio frequency and volume.
The following accessories can be
connected to the alarm clock:
- Vibrating pillow
- Flash module
- Switch module
- Acoustic module
Installation
Connect the power supply unit to the
12 V connector socket of the alarm
clock and plug it into a 230 V power
outlet. The display flashes as a sign
that the time has not yet been set.
The flashing disappears as soon as
the time is set.
Time setting
Press and h or min simultaneous-
ly to set the time.
Note
The time can be displayed in a 12 or
24 hour modus. The setting can be
changed at the 12/24 h switch at the
back of the alarm clock.
Setting the alarm time
The alarm clock has two alarm times
that can be set separately.
Alarm time 1
Press 1 and h or min simulta-
neously to set the desired alarm time
(Duration of alarm signal 3 min).
Alarm time 2
Press 2/Stop 24 h and h or min
simultaneously to set the desired
alarm time. (Duration of alarm signal
3 min).
Note
After the installation only alarm time 1
is active.
English 11