HumanTechnik DS-2 Instrucciones De Servicio página 11

12 / 24 hour mode
The time can be displayed in a 12- or
24 hour mode.
The adjustment is made with the
»24h/12h« switch on the reverse side
of the alarm clock.
Power cut backup
The battery compartment can hold 4
batteries of size AAA (not included).
In the event of a power cut, these
guarantee the continuation of the set
time.
Please note: During a power cut, the
time display and the flash are not ac-
tive as the power consumption is too
high for the backup batteries!
Telephone ring signalling
The »DS-2« can indicate incoming
telephone calls by flash and sound.
There are two connection possibilities
to pick up an incoming phone call:
1. You can pick up the telephone ring
signal by using a modem- or answer-
ing-machine type telephone cable
(optionally available). The cable
connects the alarm clock with a se-
condary connector of the telepho-
ne socket.
2. You can pick up the ring signal from
the sound outlet of the telephone
by using an external microphone
(optionally available) which is fixed
with a self-adhesive pad to the
sound outlet.
The microphone cable is connected
to the "MIC" connection socket at
the backside of the »DS-2«.
Please note:
The ringing signal of the telephone is
set factory-wise and cannot be alte-
red with the tone adjustment buttons.
Maintenance and care
The »DS-2« does not require any
maintenance. If the unit does be-
come dirty, simply wipe it clean
with a soft, damp cloth. Never use
spirits, thinners or other organic sol-
vents. Do not set up the unit where
it will be exposed to full sunlight for
long periods. In addition it must be
protected against excessive heat,
moisture and severe mechanical
shock.
Note: This product is not protected
against splash water. Do not place
any containers filled with water, such
as flower vases, or anything with an
open flame, such as a lit candle, on
or near the product.
English 11