Intended Use; Assembly And Adjustments - DeWalt DWE4012 Manual De Instrucciones

.../min
........... per minute n ...................... rated speed
BPM ............. beats per minute _ ..................... earthing
IPM............... impacts per minute terminal
RPM ............. revolutions per _, ..................... safety alert
minute symbol
sfpm ............. surface feet per minute
SAVE THESE INSTRUCTIONS FOR
FUTURE USE
Motor
Be sure your power supply agrees with the nameplate marking.
Voltage decrease of more than 10% will cause loss of power and
overheating. DFiWALT tools are factory tested; if this tool does not
operate, check power supply.
COMPONENTS (Fig. 1j 6)
_, WARNING: Never modify the power tool or any part of it. Damage
or personal injury could result.
A. Spindle lock button G. Paddle switch
B. Spindle H. Lock-on button
C. Side handle I. Lock-off lever (Fig. 6)
D. Backing flange J. Guard release lever
E. Threaded clamp nut
R Guard
FIG. 1
J
F
INTENDED USE
This grinder is designed for professional grinder, sander, wire brush or
cut-off applications.
DO NOT use under wet conditions or in presence of flammable
liquids or gases.
This grinder is a professional power tool. DO NOT let children come
into contact with the tool. Supervision is required when inexperienced
operators use this tool.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of injury, turn unit off and
disconnect it from power source before installing and removing
accessories, before adjusting or when making repairs. An
accidental start-up can cause injury.