Operating Controls; Intended Use; Notes On Safety Prevention; General Safety Instructions - Protool CSP 132 E Manual De Instrucciones

3 Operating Controls

[1-1] Sawdust ejector
[1-2] Lever for pendulum guard
[1-3] Additional handhold
[1-4] Additional handhold for 2-man operation
[1-5] Parallel guide for guide rail
[1-6] Locking screw for parallel guide
[1-7] Cutting angle locking lever
[1-8] Cutting edge indicator
[1-9] Pendulum guard
[1-10] Clamping screw
[1-11] Riving knife
[1-12] Riving knife screw
[1-13] On/Off switch
[1-14] Lock-off switch
[1-15] Cutting depth scale
[1-16] Cutting depth locking lever
[1-17] Additional handhold for 2-man operation
[1-18] Cutting angle locking lever
[1-19] Cutting angle scale
[2-1] Winged screw for parallel guide
[2-2] Base plate
[2-3] Parallel guide (right hand fi tting)
[2-4] Parallel guide for guide rail
[3-1] Clamping screw
[3-2] Clamping fl ange
[3-3] Saw blade
[3-4] Mounting fl ange
[3-5] Lever for swinging guard
[4-1] Additional handhold
[4-2] Additional handhold
[5-1] Blade guard cover plate
[5-2] Pendulum guard cover plate
[5-3] Dust exhaustion connection
[5-4] Riving knife
[6-1] Mounting fl ange
[6-2] Clamping fl ange
[6-3] Planing head
[6-4] Retaining pin
[6-5] Pendulum mount cover guard
[6-6] Pendulum mount
[6-7] Blade guard cover
[6-8] Blade guard
[7-1] Mounting fl ange
[7-2] Clamping fl ange
[7-3] Curve-cutting head
[7-4] Retaining pin
[7-5] Pendulum mount cover guard
[7-6] Pendulum mount
18
[7-7] Blade guard cover
[7-8] Blade guard
Some of the items illustrated or described here
may not be included in the scope of delivery.

4 Intended Use

The machine is intended for lengthways and
crossways cutting of wood with straight cut ting
lines as well as mitre angles to 45° while rest-
ing firmly on the work piece. With suitable saw
blades, non-ferrous metal, light building mate-
rials and plastic can also be sawed.
The user alone is responsible for any liabili ties
caused by usage other than intended. Persons
under 16 are not permitted to use the appli-
ance.

5 Notes on Safety Prevention

DANGER

5.1 General Safety Instructions

-
Before using the machine, carefully read
all safety instructions and the Operating
Instructions.
- Keep all of the attached documents and
pass on the documentation if the ma chine
changes ownership.

5.2 Safety Rules for Circular Saws

a) Keep hands away from the cutting area
and the saw blade. Keep your second
hand on the auxiliary handle or the
motor housing. If both hands are holding
the circular saw, they can not be cut by the
saw blade.
b) Do not reach underneath the work. The
blade guard can not protect you from the
saw blade below the work.
c) Adjust the depth-of-cut to the thick-
ness of the work. It should not be vis ible
below the work by more than the height of
a full tooth.
d) Never hold the workpiece being cut in
your hand or across your leg. Se cure
the work on a fi rm support. It is impor-
tant to secure the work properly to mini-
mize the danger of body exposure, blade
binding or loss of control.