Operating Elements; Applications; Description; Tool Properties - Protool SSP 200 EB Manual Original / Lista De Piezas De Repuesto

3

Operating elements

[1-1] Unblock button
[1-2] On/off button
[1-3] Guide ruler
[1-4] Guide bar cover
[1-5] Manual clamp screw
[1-6] Guide runner
[1-7] Front auxiliary handle
[1-8] Oil gauge [1-9] Oil cap
[1-10] Rotary suction adaptor
[1-11] Chain adjustment wheel
[1-12] Oil feed adjuster
[1-13] Clamping lever for reverse tilt lock
[1-14] RPM selector
[1-15] Rear auxiliary handle
[1-16] Parallel stop
[2-1] Chain sprocket cover
[2-2] Fastening wheel
[2-3] Chain
[2-4] Guide bar
[2-5] Hole for tension bolt
[2-6] Tension bolt
[2-7] Clamping bolt
[2-8] Chain sprocket
[2-9] Chain adjustment wheel
[3-1] Clamping lever for reverse tilt lock
[4-1] Cut indicator for 0°
[4-2] Hand screw for cutting angle adjustment
[4-3] Bevel indicator
[4-4] Cut indicator for 45°
[4-5] Cut indicator for 60°
[4-6] Cut profi le indicator for 0°
[5-1] Oil level indicator
[5-2] Oil feed adjuster
[6-1] Distance screws
[7-1] Guide rail
[7-2] Gripper
[7-3] Angle adjuster
[7-4] Connecting spring
[7-5] Quick clamp
[8-1] Safety snap ring
[8-2] Washer
[8-3] Chain sprocket
[8-4] Spindle
Accessories shown or described are not necessarily
included with this tool.
20
All manuals and user guides at all-guides.com
4

Applications

4.1 Description

The SSP 200 EB sword saw was developed for
multi-purpose carpentry work. The machine can
make rectangular cuts and adjustable angle cuts
to a depth of 200 mm. Various types of chains al-
low you to select the right tool for the job. A cut-
ting angle as large as 60° can be set quickly and
precisely using two tilting segments and a clearly
legible bevel indicator. The machine is equipped
with a pull-out guide ruler that can be placed on
either side of the runner and guarantees a straight,
accurate cut.
The guide bar can be quickly tilted back 10°. Chain
tension can be comfortably adjusted using a wheel
that is easily accessible from the main handle. A
suitably shaped port for routing away sawdust
keeps the machine clear and can be attached to
a suction hose. During cutting, the chain receives
optimal lubrication from the oil feed pump. Once
turned on, the motor runs smoothly up to maxi-
mum RPM, thanks to an electronic control unit. The
motor is electronically protected. In the event of an
accidental overload, it switches off automatically.
If overloaded for a longer period, it switches to
"cooling mode", during which the machine runs at
a low cooling RPM, and once cooled, it returns to
the normal operating mode. When the machine is
turned off, an electric brake activates, which sig-
nifi cantly shortens the machine's run-down time.
Depending on the usage, this run-down time may
vary considerably.

4.2 Tool properties

The SSP 200 EB sword saw is designed for trans-
versal and shorter longitudinal cuts in dense, solid
wood and similar materials. The machine is oper-
ated by a person who holds and guides it using
designated handles; the basic grip is by the front
auxiliary handle and the main handle. Holding the
rear auxiliary handle is only permitted if there is
no danger of kickback. Any other usage of this ma-
chine is considered improper. The machine is not
designed for felling or trimming trees or bushes!
The manufacturer of the machine is not responsible
for any damages caused by its improper use. Risks
associated with such use of the machine are borne
solely by the user. The specifi ed use of the machine
also includes conforming to the operational, main-
tenance and repair conditions prescribed by the
manufacturer. This machine must not be operated
by people under 16 years of age.