60 Hz; 1050 W; Symbols; Tool Specifi Cations - Protool CSP 55-2 Manual Original / Lista De Piezas De Repuesto

Hand Circular Saw CSP 55-2
- original instruction
Table of contents
1 Symbols ................................... 11
2 Tool Specifi cations ...................... 11
3 Operating Controls ..................... 11
4 Intended Use ............................. 12
5 Notes on Safety Prevention ......... 12
5.1 General Safety Instructions ......... 12
5.2 Safety Rules for Circular Saws ..... 12
5.3 Additional Safety Rules
for all Circular Saws ................... 12
5.4 Specifi c Safety Rules
for CSP 55-2 Circular Saws .......... 13
5.5 Emission levels .......................... 14
6 Commissioning and Operation ...... 14
7 Adjustment ............................... 15
7.1 Cutting Depth Adjustment ........... 15
7.2 Cutting Angle Adjustment ........... 15
7.3 Cutting Edge Indicator ................ 15
7.4 Parallel Guide ............................ 15
7.5 Dust Extraction .......................... 15
7.6 Replacing the Saw Blade ............. 15
8 Operating Instructions ................ 16
9 Maintenance .............................. 16
10 Environmental Protection/
Disposal.................................... 16
11 Warranty .................................. 17
12 Declaration of Conformity ............ 17
1

Symbols

Double insulation
Warning of general danger
Risk of electric shock
Wear ear protection!
Wear a dust mask!
Use protective gloves!
Read the instructions
Not to be included in municipal refuse
Advice or tip
►
All manuals and user guides at all-guides.com
GB
2

Tool Specifi cations

Nominal voltage
Mains frequency
Power consumption
Rated rpm (no load)
Saw blade Diameter
Hole
Tooth width
Blade thickness
Cutting depth 90°
45°
Cutting angle
Weight (without accessories)
Protection class
3

Operating Controls

[1-1] Lock-off switch
[1-2] On/Off switch
[1-3] Sawdust ejector / Connection neck
for dust extraction
[1-4] Riving knife screw
[1-5] Lever for swinging guard
[1-6] Base plate
[1-7] Swinging protective guard
[1-8] Grip
[1-9] Winged screw for cutting angle
adjustment
[1-10] Winged screw for parallel guide
[1-11] Cutting mark
[1-12] Winged screw for cutting depth
adjustment
[1-13] Scale
[2-1] Parallel guide
[2-2] Allen key
[2-3] Ring spanner
[2-4] Clamping screw
[2-5] Washer
[2-6] Clamping fl ange
[2-7] Saw blade
[2-8] Mounting fl ange
[2-9] Riving knife
[2-10] Motor spindle
Not all of the accessories illustrated or de-
scribed are included as standard delivery.
230 V ~
50 / 60 Hz
1050 W
4700 min
-1
160 mm
20 mm
2.8 mm
1.8 mm
0 ... 55 mm
0 ... 38 mm
90° ... 45°
3.6 kg
II /
11