Symbols; Tool Specifi Cations - Protool CSP 132 E Manual De Instrucciones

Hand Circular Saw CSP 132 E
Table of contents
1 Symbols .......................................... 17
2 Tool Specifi cations ............................ 17
3 Operating Controls ........................... 18
4 Intended Use .................................. 18
5 Notes on Safety Prevention ................ 18
5.1 General Safety Instructions ............... 18
5.2 Safety Rules for Circular Saws ........... 18
5.3 Additional Safety Rules for all Circular
Saws ............................................. 19
5.4 Specific Safety Rules for CSP 132 E
Circular Saws .................................. 19
5.5 Noise/Vibration Information .............. 20
6 Commissioning and Operation ........... 20
7 Adjustment ..................................... 21
7.1 Electronic Motor Control .................... 21
7.2 Cutting Depth Adjustment ................ 21
7.3 Cutting Angle Adjustment ................. 21
7.4 Cut indicator ................................... 21
7.5 Parallel Guide .................................. 21
7.6 Exhaustion ..................................... 21
7.7 Replacing the Saw Blade .................. 22
8 Operating Instructions ...................... 22
8.1 Working different materials ................ 22
8.2 Two-Man Operation ........................... 23
9 Using Attachments ........................... 23
9.1 NS-CSP 250x50 Planing Attachment ... 23
9.2 RS-CSP 160x80 Curve-Cutting
Attachment ...................................... 23
10 Maintenance ................................... 24
11 Environmental Protection/Disposal ..... 24
12 Warranty ........................................ 24
13 Declaration of Conformity ................. 24
GB

1 Symbols

Double insulation
Warning of general danger
Risk of electric shock
Wear ear protection!
Wear a dust mask!
Use protective gloves!
Read the instructions
Not to be included in municipal refuse
Advice or tip

2 Tool Specifi cations

Nominal voltage
Mains frequency
Power consumption
Rated rmp (no load)
Constant-Electronic
Smooth start
Overload protection
Temperature fuse
Saw blade
Cutting depth
Cutting angle
Weight (without accessories)
Protection class
230 V ~
50 / 60 Hz
2300 W
2200 min-1
ø 350 mm
Hole 30 mm
Tooth width 3.5 mm
Blade thickness 2.5 mm
60° 0 ... 60 mm
45° 0 ... 90 mm
0° ... 60°
•
•
•
•
16 kg
II /
17