Symbols; Intended Use; Control Elements - Protool JSP 120 Manual Original

Jig saw JSP 120, JSP 120 E,
BSP 120 E
Original Instruction
Table of contents
1 Symbols .................................. 13
2 Intended use............................ 13
3 Control elements ...................... 13
4 Technical data .......................... 14
5 Safety instructions .................... 14
5.1 General safety instructions ......... 14
5.2 Machine-related safety instruc-
tions ....................................... 14
5.3 Emission levels ......................... 14
5.4 Metalworking............................ 15
6 Operation ................................ 15
7 Settings................................... 15
7.1 Changing tools ......................... 15
7.2 Adjusting three saw blade guide . 16
7.3 Fitting the splinterguard............. 16
7.4 Fitting the chip guard ................ 16
7.5 Dust extraction ......................... 16
7.6 Adjusting the base runner .......... 16
7.7 Adjusting the pendulum stroke ... 16
7.8 Adjusting the number of strokes . 16
8 Working with the machine .......... 17
8.1 Free hand according to the scribe
mark ....................................... 17
8.2 Plunge cutting without pilot drill-
ing.......................................... 17
9 Service and maintenance ........... 17
10 Accessories .............................. 17
10.1 Parallel guide ........................... 17
10.2 Circle cutter ............................. 17
10.3 Saw blades, other accessories .... 17
10.4 Festool CMS ............................. 18
11 Environmental Protection/ Dis-
posal....................................... 18
12 Warranty ................................. 18
13 EU Declaration of Conformity...... 18
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1

Symbols

Warning of general danger
Risk of electric shock
Read the Operating Instructions/
Notes!
Wear a dust mask.
Wear ear protection.
Wear protective goggles.
Wear protective gloves.
Do not throw in the household waste.
2

Intended use

Jigsaws are designed for sawing wood and
similar materials similar to wood. With the
special saw blades offered by Protool, these
machines can also be used for sawing plastic,
steel, aluminium, non-ferrous metal and ce-
ramic plates.
The user bears the responsibility for
damage and accidents caused by im-
proper use.
3

Control elements

JSP 120, JSP 120 E
[1-1] On/Off switch
[1-2] Speed control (only JSP 120 E)
[1-3] Mains power cable
[1-4] Allen key
[1-5] Pendulum stroke switch
BSP 120 E
[2-1] Locking button
[2-2] On/Off switch
[2-3] Speed control
[2-4] Extractor connector
[2-5] Lever
[2-6] Hock
13