Burner Use Suggestions; Super Sealed Surface Burners - Haier HCC2430AGS Manual Del Usuario

BURNERS WITH TWO-RING FLAME
This special burner has two separate flame rings to provide a real full heat regulation
from high power to simmering.
To set:
1. Push and turn counterclockwise the knob
between HI-LO main flame, when the burner
is turned on, the main flame and the Simmer
flame will always light and stay on.
2. Setting heat level main flame from HI-LO
power.
Simmer setting
Turn the knob counterclockwise on HI-LO
simmering position. The simmer flame setting will
use only the center flame.
Turn off the burner
Turn the knob clockwise as far as it will go to the off position.

BURNER USE SUGGESTIONS

•
Use the right front, right rear or left rear burners for simmering, or for cooking
smaller quantities of food requiring small cookware.
•
Use the left front POWER burner for bringing liquids to a rapid boil, cooking large
quantities of food, or for deep-fat frying requiring large cookware.
The Burner Flames
Turn each burner on. Flames should be blue in color with no trace of yellow. The
burner flames should not flutter or blow away from the burner. The inner cone of the
flame should be between 1/2" and 3/4" long.

SUPER SEALED SURFACE BURNERS

IMPORTANT: Do not obstruct the flow of combustion and ventilation air around the
burner grate edges.
Burner cap and gas spreader
Always keep the burner cap and gas spreader in place when using a surface burner.
A clean burner cap and spreader will help prevent poor ignition and uneven flames.
Always clean the part after a spillover and routinely remove and clean according to
the "General Cleaning" section.
HI
MED
OFF
LO
11