Preparing For Use; Bluetooth Connectivity; Using Your Philips Sonicare Power Toothbrush - Philips Sonicare HX6321/02 Manual De Instrucciones

Preparing for use

Applying your favorite sticker
The Sonicare For Kids comes with replaceable stickers.
1 Apply your favorite sticker on the handle (Fig. 2).
Note: Make sure you line up the cut-out areas on the sticker with
the buttons on the front of the handle.
Attaching the brush head
1 Align the brush head so the bristles point in the same direction
as the front of the handle (Fig. 3).
2 Firmly press the brush head down onto the metal shaft until it
stops.
Note: There is a small gap between the brush head and the
handle.
Charging your Sonicare
1 Plug the charger into an electrical outlet.
2 Place the handle on the charger (Fig. 4).
-
The battery charge indicator in the power on/off button
flashes and the handle beeps twice to indicate that the
toothbrush is charging.
-
When the Philips Sonicare is fully charged, the battery
charge indicator stops flashing and remains on.
Note: If the battery charge of the Philips Sonicare is low, you hear
3 beeps and the battery charge indicator flashes rapidly for 30
seconds after the brushing cycle.
Note: To keep the battery fully charged at all times, you may keep
the Philips Sonicare on the charger when not in use. The charging
indicator flashes until your toothbrush is fully charged.

Bluetooth connectivity

Before you start the connectivity procedure, make sure your
mobile device runs on Bluetooth 4.0 or higher.
Note: For the latest information on device compatibility, please
visit the App Store or Google Play.
Connecting your toothbrush
1 Download the Philips Sonicare For Kids app from the App
Store or Google Play.
2 Confirm Bluetooth is switched on on your mobile device
before you open the app. Check the settings on your mobile
device to turn on Bluetooth.
3 Open the Philips Sonicare For Kids app and follow the app
instructions displayed on your mobile device.
4 To connect the toothbrush to the app, turn on the toothbrush
by pressing either the power on/off button or the bushing
mode button.
Note: Make sure the toothbrush is not on the charger when
you turn it on.
5 The app automatically connects with the toothbrush. If the
toothbrush does not connect, follow the troubleshooting steps
provided in the app.
Note: Keep your mobile device close to your toothbrush when
you use your toothbrush. Make sure your mobile device is safe
in a dry place.

Using your Philips Sonicare Power Toothbrush

For children under age 8, it is recommended that a parent or
adult caregiver perform toothbrushing.
Brushing instructions
1 Wet the bristles and apply a small amount of toothpaste.
2 Place the toothbrush bristles against the teeth at a slight angle
(45 degrees), pressing firmly to make the bristles reach the
gumline or slightly beneath the gumline. (Fig. 5)
Note: Keep the center of the brush in contact with the teeth at
all times.
3 Press the power on/off button to turn on the Philips Sonicare.
4 Apply light pressure to maximize Philips Sonicare's
effectiveness and let the Philips Sonicare toothbrush do the
brushing for you. Do not scrub.
5 Gently move the brush head slowly across the teeth in a small
back and forth motion so the longer bristles reach between
your teeth. Continue this motion throughout the brushing
cycle.
6 To clean the inside surfaces of the front teeth, tilt the brush
handle semi-upright and make several vertical overlapping
brushing strokes on each tooth (Fig. 6).
Note: To make sure you brush evenly throughout the mouth,
divide your mouth into 4 sections using the Quadpacer
feature.
7 Begin brushing in section 1 (outside upper teeth) and brush for
30 seconds before you move to section 2 (inside upper teeth).
Continue brushing in section 3 (outside lower teeth) and brush
for 30 seconds before you move to section 4 (inside lower
teeth) (Fig. 7).
8 After you have completed the brushing cycle, you can spend
additional time brushing the chewing surfaces of your teeth
and areas where staining occurs (Fig. 15). You can also brush
your tongue, with the toothbrush turned on or off, as you
prefer.
Your Philips Sonicare is safe to use on:
- Braces (brush heads wear out sooner when used on braces).
- Dental restorations (fillings, crowns, veneers).
Note: When the Sonicare is used in clinical studies, the handle
should be fully changed and the Easy-start feature
deactivated
Brushing modes
The Philips Sonicare automatically starts in the default high
mode.
1 Press the brushing mode button to toggle between modes
(Fig. 9).
The green mode light indicates the selected mode.
- High mode: Full-strength mode designed for
older/independent brushers.
- Low mode: Reduced power mode used for training and
introducing younger children to the sonic experience.
Features
KidTimer
- The KidTimer plays a congratulatory sound sequence at the
end of the pre-determined brushing time. Additionally, the
KidTimer automatically turns off the handle when the brushing
cycle is complete.
- When in high mode, the KidTimer is set at 2 minutes.
- When in low mode the KidTimer is set at 1 minute and slowly
increases over time. The progression of time helps young
children reach the dentist recommended 2 minutes of
brushing.
Note: Instruct your child to brush until they hear the
congratulatory tune and the toothbrush turns off.
KidPacer
The Sonicare For Kids uses a short series of tunes to alert the
brusher to move to the next brushing quadrant of the mouth and
concludes the brushing cycle with a congratulatory tune before it
automatically turns off. This ensures that the child's teeth get a
thorough, overall clean (see "Brushing instructions").
Note: Instruct your child to brush until they hear the
congratulatory tune and the toothbrush turns off.
Easy-start
The Easy-start feature gently increases the power over the first 14
brushings to help you get used to the brushing with the Philips
Sonicare. The Sonicare For Kids comes with the Easy-start
feature activated.