Preparing For Use; Attaching The Brush Head - Philips Sonicare CleanCare 5000 Serie Manual De Instrucciones

preparing for use

1 To store excess cord, wind it round the cord
storage hooks in the bottom of the charger.

attaching the brush head

1 To place the brush head on the handle, slide
the ribs on the inside of the nut into the
grooves in the top of the handle.
2 Screw the brush head nut clockwise until it
is firmly tightened. If the brush head rattles
during use, tighten the nut further.
3 Remove the travel cap from the brush head
before you start brushing.
Charging
Charge the Sonicare for at least 24 hours during the
first few days of use.
We advise you to keep the Sonicare in the plugged-
in charger when not in use, to maintain a full battery
charge.
When the battery is empty, it takes at least 24 hours
to charge the Sonicare fully.
1 Place the handle in the charger (with the on/off
button facing towards the front of the charger)
to charge the appliance.
EnglisH
7