Listening To An External Source - Teac MC-DX30 Manual Del Usuario

MEMORY
To check the programmed order
In the stop mode, press the MEMORY button repeatedly. The
track number and program number will be shown on the
display.
To add a track to the end of the program
In the stop mode, press the MEMORY button repeatedly until
"00" appears on the display. Select a track number using the
Skip button (. or/ ) and then press the MEMORY
button. The track is added to the end of the program.
To overwrite the program
In the stop mode, press the MEMORY button repeatedly until
the program number to be changed appears on the display.
Select a new track number using the Skip button (.or/)
and then press the MEMORY button.
To clear program
To clear the programmed contents, press the MEMORY and
the STOP button (H) in the stop mode.
< If the OPEN/CLOSE button is pressed, the programmed
contents will also be cleared.
< If the unit is disconnected from the power supply, the
programmed contents will be cleared.

Listening to an External Source

1
3 2
1
Connect the PHONES jack (audio output jack) of a
portable audio player to the AUX IN jack of the MC­
DX30 using the supplied stereo mini plug cable.
2
Press the FUNCTION button to select "AUX".
3 Play the source, and adjust the volume using the
VOLUME buttons of the MC-DX30 and the audio player.
When using the PHONES jack of your mini player, you must
adjust the volume of the mini-player or you may hear no
sound from your MC-DX30.
15