Listening To An External Source - Teac SR-80i Manual Del Usuario

Turning the auto clock adjustment on and off
1
When in CT mode, press and hold the RDS
button for more than 2 seconds.
more than 2 sec.
2
Within 2 seconds, select "MODE OFF" or "MODE ON" by pressing the Skip ( . / / ) buttons.
3
Press the Select button to confirm the setting.
Hold down

Listening to an External Source

See pages 6 - 7 "Connections".
1
Connect a portable audio player to the AUDIO
jacks using the supplied RCA pin-stereo mini
plug cable (pages 6 - 7
2
Press the FUNCTION button repeatedly to
select "AUX".
3
Play the source, and adjust the volume using
the VOLUME buttons and the connected
portable audio player.
When using the headphones jack of the component,
if you do not adjust its volume, you might not hear
any sound from SR-80i.
Turning the volume of the connected component
up too high might cause the sound from SR-80i to
be distorted. In this case, reduce the volume of the
component until the distortion stops and then adjust
the volume level of SR-80i to a comfortable listening
level.
).
D
27