Care Information - Oster 2604 Manual De Instrucciones

U
• Before using the Mixer, wash the beaters, dough hooks and bowl in hot, soapy water.
Rinse and dry.
• The Mixer can be removed from the stand and used as a hand Mixer.
• Although your Mixer is also designed to mix dough, if you notice that the motor starts
stalling, you should not proceed mixing since it could cause overheating and possible
motor damage.
H A
OW TO SSEMBLE
• With the arm of the stand in the raised position,
place Mixer onto platform. Put the front portion
of the Mixer down first and lower the back of the
unit until it clicks securely into place.
• Push the Arm-Release Button and lift the Mixer into
the upright position (Figure 1). Place bowl onto base
of stand making sure it fits into place.
• For proper operation, beaters must be inserted into the
correct openings. First, slide the beater with the gear on
the stem into the larger opening in the Mixer Platform.
Then slide into Mixer itself until it clicks securely into place. Place the remaining beater
into the smaller opening in the same manner. Push Arm-Release Button and lower
Mixer back into position.
H
OW TO
• To raise the Mixer Arm from the lower (Stand) position, push Stand Release Button on
the back of the Stand (Part C on the "Features" diagram – Page 3) and raise the Arm.
H R
OW TO
• Place two-position arm in lower position. Push Mixer
Release Button. Press button and lift Mixer up. Slide forward
and upward to remove from platform (Figure 2). Be sure the
Mixer is unplugged before removing the Beaters. Your Stand
Mixer has an Eject Button to easily remove the beaters. Press
the Eject Button to release the beaters for easy cleaning.
REMOVING BEATERS
• Be sure the Mixer is unplugged before removing the beaters.
Press the eject button for easy removal and cleaning
of beaters.
C I
SE AND ARE NFORMATION
Y O
OUR
R
AISE THE
M
EMOVE THE IXER FROM THE
4
® S M
STER TAND IXER
F
IGURE
M A
IXER RM
S
TAND
F
IGURE
1
2