Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Linear Pull Brake
1.
If fitted with linear pull brakes, insert the brake
body into the center spring hole in the frame
mounting boss, and then secure the brake body
to the frame with the link fixing bolt.
Spring
hole
Stopper pin
5 mm Allen key
Washer
Link
fixing
bolt
2.
While holding the shoe against the rim, adjust the
amount of shoe protrusion by interchanging the
position of the B washers (i.e. 6 mm and 3 mm) so that
dimension A is kept at 39 mm or more.
39 mm or more
A
3 mm washer B
Washer A
Shoe fixing link
6 mm washer B
Shoe fixing nut
Washer
Washer A
©2014 PACIFICCYCLE INC.
51
Tabla de contenido
