Schwinn PACIFICCYCLE ROAD BICYCLE Manual De Uso Y Cuidado página 19

Handlebar Binder Bolt
Exceeds 2 1/2"
(64mm)
Clamp on stems for threadless steering systems cannot be adjusted height wise. It is
possible to make certain parts changes that will allow you to alter the handlebar posi-
tion. Please consult your authorized bicycle dealer for available options. See diagram
on page 41.
The stem's "Minimum Insertion" mark must not be visible above the top of the headset.
If the stem is extended beyond this mark, the stem may break or damage the fork's
steerer tube, which could cause you to lose control and fall.
Failure to properly tighten the stem binder bolt, the handlebar binder bolt, or the bar
end extension clamping bolts may compromise steering action, which could cause
you to lose control and fall. Place the front wheel of the bicycle between your legs and
attempt to twist the handlebar/stem assembly using a reasonable amount of force. If
you can twist the stem in relation to the front wheel, turn the handlebars in relation to
the stem, or turn the bar end extensions in relation to the handlebar, you must tighten
the appropriate bolts accordingly.
Handlebar Height
Stem Wedge Bolt
Maximum comfort is usually obtained when the handlebar height is
equal to the height of the seat. You may wish to try different heights
to find the most comfortable position.
Maximum Height/
Minimum Insertion
Mark
WARNING: If your bicycle does not fit properly, you
may lose control and fall. If your new bike doesn't fit
ask your local bike shop to adjust it for proper fit.
©2014 PACIFICCYCLE INC.
17