The scaffold may only be used if it has been properly and fully erected as specified in these assembly instructions
and is set up in a vertical position.
The multipurpose aluminium scaffold must not be used by children.
Always use and store the scaffold out of the reach of children.
The scaffold should be put away or stored in a dry environment either stood upright or laid flat.
Do not expose the scaffold to weather conditions such as rain, ice, snow, etc., for a prolonged period of time
in order to avoid incurring damage.
4
Assembling the multipurpose scaffold
E) Assembling the horizontal and platform struts
Assembling the diagonal struts
1. Insert the "Speed Lock" quick lock system in the cavity inside
the rung.
2. Flip the safety hook down around the upright of the ladder.
3. Secure the "Speed Lock" quick lock system.
G) Securing the working platform
1. Insert the working platform into the rungs and secure with
both sets of hooks (max. 9 rungs from below).
2. Then stand the multipurpose scaffold up.
5
Dismantling the scaffold
The multipurpose scaffold is dismantled in the reverse order.
Note: The safety hook, see Figure [X], holds the strut or the
upright in the installation position when the quick lock is
released. Swing the safety hooks away from the upright of
the ladder before removing the guard rails and the horizontal
and diagonal struts.
6
Technical data / Different ways to assemble the scaffold
Pages 34 / 35
Pages 36 / 37
Problems and solutions:
used when assembly has been
successfully completed.
= Check the assembly instructions
against how the scaffold was
assembled.
If necessary, contact Hailo
(see page 6).
or deformed.
= Replace damaged or deformed parts
before assembling.
If necessary, contact Hailo
(see page 6).
GB
7