Hailo 1-2-3 500 Combi Instrucciones De Montaje página 6

Hailo 1-2-3 500 Combi Aluminium multipurpose scaffold (9459-501)
Foreword
Dear Customer,
Congratulations on your purchase of the
Hailo 1-2-3 500 Combi Multipurpose Alu-
minium Scaffold. We hope you enjoy using
this versatile and sturdy scaffolding unit.
This multipurpose aluminium scaffold meets
the requirements of the EN 131 1-2-3-4 and
NF E85-200 standards.
Please read these assembly instructions
thoroughly before using the scaffold, paying
particular attention to the safety instructions
on page 30.
Please keep these assembly instructions in a
safe place.
If you have any questions or comments
about our multipurpose aluminium scaffold,
please don't hesitate to call us.
We'd be delighted to assist.
Hailo-Werk, Rudolf Loh GmbH & Co. KG
Daimlerstraße 8, 35708 Haiger, Germany
+44 1792 701999
Email: info @ hailo.de
www.hailo.de
6
This multipurpose aluminium scaffold is
designed exclusively for domestic use.
Read the assembly instructions carefully
before use and keep them in a safe place.
1 Pictograms illustrating safety instructions
1. Use as a scaffold
2. Use as a lean-to and double ladder
2 Parts overview
3 Pre-assembly
A) Preparing the horizontal and diagonal struts
B) Preparing the guard rails
1. Pre-fit two "Speed Lock" one-handed quick lock systems to
each strut.
2. Tighten the self-locking nuts to ensure that the washer is up
against the threaded bolt.
3. Then check that the quick lock functions properly.
4. Pay attention to the position where it is fitted.
C) Preparing the working platform
Pre-fit 2 sets of hooks to the working platform
(positioned diagonally).
D) Securing the cross pieces
1. Fit the cross piece to ladder section 1.
2. Secure the cross piece with the set of castors to ladder section 2.
Pages 30 / 31
Pages 32 / 33