Silvercrest SLB 450 A1 Instrucciones De Uso página 75

Handling and operation
NOTICE
► In the same way, the pump may be switched on or off using the remote
control
Functions
The appliance off ers three diff erent operating modes:
■ Continuous with low intensity
■ Continuous with high intensity
■ Massage operation
IMPORTANT
Risk of damage to the appliance from excessive continuous
operation.
Excessive continuous operation may cause an overheating of the pump.
► The appliance switches off after 20 minutes usage time.
► Allow the pump to cool down for 10 minutes after the normal period of use
before switching it back on.
Function selection on the pump
Switch the pump
operation indicator
level of intensity.
By once again pressing the function button
blinks red and the pump switches to the high intensity level.
By pressing the function button
the programme mode. The LED operation indicator
the appliance is now working in the massage mode. With this, the appliance
works by alternating between the low and high intensity levels.
Press the function button
The LED operation indicator
NOTICE
► The appliance switches off automatically after 20 minutes usage time.
SLB 450 A1
9
by pressing the function button
on with one press of the function button
5
blinks green, and the pump is operating at the lowest
3
a fourth time to switch the appliance off .
5
10
.
3
the LED operation indicator
3
once again, the appliance switches into
5
blinks orange, and
extinguishes.
GB
MT
3
. The LED
5
73