Starting The Cleaner - Tecno-gaz MULTISTERIL 2200S Manual Del Usuario

ENGLISH
Once you have made all the connections described in the previous section, turn the
switch on the back of the cleaner to I.
Place the items to clean inside the basket and put the basket in the tank. Make sure
that no part of the basket is touching the tank walls.
Remove any excess soiling from the items prior to processing them in the cleaner to
prevent clogging the outlet filter.
The manufacturer's logo will appear on the display. After a few seconds you will be
asked to select one of the following treatment cycles:
1. Program A
2. Program B
3. ProgramC
Press to scroll through the three cycles described below:
Consult the instructions supplied by the manufacturers of the solutions used
for information on which settings to apply.
All three programs can be set by your needs.
Press to automatically select the last program used.
The manual program maintains the settings of the last manual program used.
Choose this program to change the factory settings:
Press to scroll through the settings and press
When you reach EXIT, press
Press to start the program applying the selected settings.
Disinfectant/detergent intake %
Heating (°C)
Degas function
SWEEP function
Ultrasonic cleaning
Drying
Starting the cleaner:
Cycle selection screen:
Program A – B – C
to exit program setting.
Description
to confirm a setting.
Settings
0 ÷ 6 %
30 ÷ 60 °C
SI ‐ NO
SI ‐ NO
0 ÷ 30 min
SI ‐ NO
16
Step
1%
10 °C
‐
‐
1 min
‐