Instructions For The User - Tecno-gaz MULTISTERIL 2200S Manual Del Usuario

ENGLISH
Drying:
The cleaner dries the instruments by blowing hot air over them to take
away the humidity in the form of water vapour.
When all the above processes have been completed the cleaner emits a sound signal to
inform the user.
INSTRUCTIONS FOR THE USER
DO NOT TURN OUT THE DEVICE DURING THE DRYING PHASE OR DURING
THE VENTILATION.
IF THE DEVICE TURN OUT DUE TO A BLACKOUT OR AN EMERGENCY CASE
OPEN IMMEDIATELY THE CAP.
IF THIS ADVISE IS NOT RESPECTED, THIS WILL DAMAGE THE VENTILATOR
AND TO CAP OF THE DEVICE.
CLOSE THE VALVE UPSTREAM EVERY NIGHT OR WHENEVER THE CLEANER
REMAINS UNUSED FOR A NUMBER OF DAYS.
DO NOT EXPOSE THE CLEANER TO FREEZING TEMPERATURES.
DO NOT INSTALL THE CLEANER CLOSE TO SOURCES OF HEAT.
DO NOT INSTALL BELOW WATER TAPS.
KEEP THE TANK AND THE COVER GASKET CLEAN.
USE DETERGENTS THAT ARE SUITABLE FOR STAINLESS STEEL.
DO NOT PERFORM MORE THAN TWO DRYING CYCLES IN A ROW.
This cleaner is intended for professional use and for the purposes described in this
manual.
Press for 5 seconds, then press
Press to confirm the selected language.
Press for 5 seconds to select the starting delay (from 0 to 12 hours). Press
from one value to the next, and press Start to start the treatment cycle.
During the starting delay the display will show the time remaining for the cycle to start.
WARNING: In case of power failures, delayed starting is cancelled.
Setting the language:
to scroll through the available languages.
Delayed starting:
18
to go