Preparation For Use - Dräger X-plore 4000 Serie Instrucciones De Uso

Do not use filtering devices for entering unventilated tanks, mines,

canals, etc.
Do not use in oxygen-enriched atmospheres.

The oxygen content of the ambient air must not drop below the

following limit values:
at least 17 vol. % oxygen in all European countries except for

the Netherlands, Belgium and the UK
at least 19 vol. % oxygen in the Netherlands, Belgium, the UK,

Australia and New Zealand
In other countries, observe the applicable national regulations.
The weight of the respiratory filters must not exceed 300 g.

If necessary, use appropriate eye and head protection.

Before first use, the operating company/user must ensure the

following (see European Directive 89/656/EEC):
the fit must be perfect, e.g. to ensure an absolutely tight fit,

the personal protective equipment must match all other types

of protective equipment worn at the same time (e.g. protective
jacket),
the personal protective equipment must be suitable for

respective workplace conditions,
the personal protective equipment must meet the ergonomic

and health requirements of the respective wearer of
respiratory protective equipment.
3.2

Preparation for use

X-plore 4740 with respiratory filter:

a. Screw in the respiratory filter.
b. Don the half mask (see chapter 3.2.1 on page 30).
c. Test for leaks (see chapter 3.2.2 on page 31).
X-plore 4740 with powered air purifying respirator or hose

breathing respirator:
a. Don the half mask (see chapter 3.2.1 on page 30).
b. Test for leaks (see chapter 3.2.2 on page 31).
X-plore 4000
Use
29