6- Instructions; 6.1 Battery And Fuse Placement - Steren MUL-288 Manual De Instrucciones

6. Instructions

6.1 Battery and fuse placement

1. Remove cover protector.
2. Locate the battery cover on the back side of the multimeter.
3. Use a screwdriver to remove the screw and lift the cover.
4. Insert a 9 V battery. Verify the polarity. Or in case, remove the old fuse
and install a new one (FF400mA / 1000V or FF10A / 600V)
5. Replace the cover and screw it back on.
When the battery icon appears on the screen, you must replace it.
13 13