Technical Data - Nice SPIDER 6060 Manual De Instrucciones

TECHNICAL DATA:

Power
Max. flashing light power
Max accessories current, 24 V
Max work time
Pause time
Courtesy light time
Working temperature
TECHNICAL DATA OF THE BUILT-IN RECEIVER:
Reception frequency
Sensitivity
Decoding
Nice SPA reserves the right to modify its products at any time without prior notice.
FINAL NOTES:
This manual is only for use by technical personnel qualified to carry out the installation.
• No information given in this manual can be considered of any interest to the end user!
• No settings or adjustments contained in this manual can be carried out by the end user!
✓ Once the system is finished inform the end user, in detail also in writing, how to use the automatism, about residual hazards
and about how to use the manual unlock device in the event of a power cut.
✓ Inform the owner of the system about the need for a regular and accurate maintenance, especially regarding a regular check
of the safety and torque limiting devices.
✓ The person who installs the automation must always issue a test report and attach it to the technical documentation.
✓ The installer must write the declaration of conformity in accordance with the European 93/68 EEC (and subsequent
amendments) and give a copy to the owner of the system.
: 230 Vac ±20% , 50 Hz
: 25 W a 24 Vdc (the output has a fixed voltage)
: 200 mA
: 60 Seconds.
: Programmable from 1 to 120 Seconds.
: 60 Seconds.
: -20 °C ÷ 70 °C
: 433.92 Mhz
: greater than 1 µV for a correctly received signal
(average range 100-150 m. with an ABF - ABFKIT aerial)
: digital (4096 combinations) suitable for FLO1, FLO2. FLO4 trasmitter.
English
17