Installing The Power Unit; Connecting The Hose - Invacare MicroAIR MA50CE Serie Manual Del Usuario

4 OPERATION
4.2

Installing the Power Unit

1. Swing out the bed hooks on the back of the control unit.
2. Hang the control unit on the footboard with the control panel facing the caregiver.
 Control unit should be facing away from the patient
If the bed does not have a footboard, place the control unit on a flat surface, leaving room for the hose to hang down.
Bed Hooks in
Closed Position
4.3

Connecting the Hose

CAUTION
Ensure that the hose connecting the control unit to the overlay is routed such that it cannot be stepped on, kinked, squeezed or
otherwise damaged.
The power cord to the control unit should be positioned to avoid a trip hazard and/or damage to the cord. Invacare recommends placing
the cord through the cable management system located along the side of the mattress and attaching it to an electrical outlet at the head
of the bed.
Invacare® MA50CE Series
FIGURE 2 Installing the Power Unit
16
Bed Hooks in
Open Position
Part No 1176084