EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.
3.
Periodically check to make sure the blades come to
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIE
complete stop within approximately (5) five seconds after
operating the blade disengagement control. If the blades
do not stop within the this time frame, your machine
should be serviced professionally by an authorized MTD
EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.
Service Dealer.
4.
Check brake operation frequently as it is subjected to wear
during normal operation. Adjust and service as required.
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIE
5.
Check the blade(s) and engine mounting bolts at frequent
intervals for proper tightness. Also, visually inspect blade(s)
for damage (e.g., excessive wear, bent, cracked). Replace
EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.
the blade(s) with the original equipment manufacturer's
(O.E.M.) blade(s) only, listed in this manual. "Use of parts
which do not meet the original equipment specifications
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIE
may lead to improper performance and compromise
safety!"
6.
Mower blades are sharp. Wrap the blade or wear gloves,
and use extra caution when servicing them.
EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.
7.
Keep all nuts, bolts, and screws tight to be sure the
equipment is in safe working condition.
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIE
8.
Never tamper with the safety interlock system or other
safety devices. Check their proper operation regularly.
9.
After striking a foreign object, stop the engine, disconnect
the spark plug wire(s) and ground against the engine.
EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.
Thoroughly inspect the machine for any damage. Repair
the damage before starting and operating.
10.
Never attempt to make adjustments or repairs to the
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIE
machine while the engine is running.
11.
Grass catcher components and the discharge cover are
subject to wear and damage which could expose moving
EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.
parts or allow objects to be thrown. For safety protection,
frequently check components and replace immediately
with original equipment manufacturer's (O.E.M.) parts only,
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIE
listed in this manual. "Use of parts which do not meet the
original equipment specifications may lead to improper
performance and compromise safety!"
12.
Do not change the engine governor settings or over-speed
EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.
the engine. The governor controls the maximum safe
operating speed of the engine.
13.
Maintain or replace safety and instruction labels, as
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIE
necessary.
14.
Observe proper disposal laws and regulations for gas, oil,
etc. to protect the environment.
EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.
15.
According to the Consumer Products Safety Commission
(CPSC) and the U.S. Environmental Protection Agency (EPA),
this product has an Average Useful Life of seven (7) years,
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIE
or 270 hours of operation. At the end of the Average Useful
Life have the machine inspected annually by an authorized
service dealer to ensure that all mechanical and safety
systems are working properly and not worn excessively.
EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.
Failure to do so can result in accidents, injuries or death.
WARNING!
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIE
follow the warnings and instructions in this manual and on the machine.
EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIE
6
S
2 — i
ection
Your Responsibility—Restrict the use of this power machine to persons who read, understand and
S
o
p
mportant
afe
peration
racticeS
Do not modify engine
To avoid serious injury or death, do not modify engine in any
way. Tampering with the governor setting can lead to a runaway
engine and cause it to operate at unsafe speeds. Never tamper
with factory setting of engine governor.
Notice Regarding Emissions
Engines which are certified to comply with California and federal
EPA emission regulations for SORE (Small Off Road Equipment)
are certified to operate on regular unleaded gasoline, and
may include the following emission control systems: Engine
Modification (EM), Oxidizing Catalyst (OC), Secondary Air
Injection (SAI) and Three Way Catalyst (TWC) if so equipped.
When required, models are equipped with low permeation fuel
lines and fuel tanks for evaporative emission control. California
models may also include a carbon canister. Please contact
Customer Support for information regarding the evaporative
emission control configuration for your model.
Spark Arrestor
WARNING!
internal combustion engine and should not be used
on or near any unimproved forest-covered, brush
covered or grass-covered land unless the engine's
exhaust system is equipped with a spark arrestor
meeting applicable local or state laws (if any).
If a spark arrestor is used, it should be maintained in
effective working order by the operator. In the State of California
the above is required by law (Section 4442 of the California Public
Resources Code). Other states may have similar laws. Federal laws
apply on federal lands.
A spark arrestor for the muffler is available through your
nearest engine authorized service dealer or contact the service
department, P.O. Box 361131 Cleveland, Ohio 44136-0019.
SAVE THESE INSTRUCTIONS!
This machine is equipped with an