Yamaha YAS-106 Manual De Instrucciones página 32

Bluetooth
Problem
Unable to connect the unit to
a Bluetooth device.
No sound is heard or the
sound is intermittent via the
unit.
32
En
Cause
Bluetooth is not selected as the input source.
The device does not support A2DP.
A Bluetooth adaptor, etc. that you want to connect to the
unit has a password other than "0000".
The unit and device are too far apart.
There is a device (microwave oven, wireless LAN, etc.)
outputs signals in the 2.4 GHz frequency band nearby.
Another Bluetooth device is connected.
As more than nine devices have been connected,
information for the oldest connection has been deleted.
The Bluetooth connection of the unit with the device is
disconnected.
Bluetooth is not selected as the input source.
The unit and device are too far apart.
There is a device (microwave oven, wireless LAN, etc.)
outputs signals in the 2.4 GHz frequency band nearby.
The device is not set to send Bluetooth audio signals to
the unit.
Playback on the device has not been performed.
The device's volume is set to minimum.
Remedy
Select Bluetooth as the input source (p. 23).
Connect to a Bluetooth audio device that supports A2DP.
Use a Bluetooth adaptor, etc. whose password is "0000".
Position the Bluetooth device so that it is less than 10 m (33 ft)
from this unit and connect the device to this unit.
Move this unit away from the device that is emitting radio
frequency signals.
Terminate the current Bluetooth connection, and connect to the
device from which audio should be received.
Connect to the device again. The unit is can connect to up to
eight Bluetooth devices for receiving audio. If a new device is
successfully connected to the unit after eight other devices have
already been connected, the device with the earliest connection
date will have been deleted to make room for the new device.
Perform Bluetooth connection operations again (p. 23).
Select Bluetooth as the input source (p. 23).
Move the Bluetooth device so that it is less than 10 m (33 ft) from
this unit.
Move this unit away from the device that is emitting radio
frequency signal.
Check that the Bluetooth function of the device is set properly.
Perform playback on the device.
Turn up the volume level on the device.