SimplyGo Mini User Manual
Warnings (continued)
•
To ensure that you receive the correct therapeutic amount of oxygen
delivery according to your medical condition, the Philips Respironics
SimplyGo Mini device must be used:
-
Only after one or more settings have been individually
determined or prescribed for you at your specific activity levels
-
With the specific combination of parts and accessories that
are in line with the specification of the oxygen concentrator
manufacturer and that were used while your settings were
determined
•
Some respiratory efforts of the patient might not trigger the
SimplyGo Mini concentrator�
•
The settings of the Philips Respironics SimplyGo Mini device might
not correspond with continuous flow oxygen�
•
The settings of other models or brands of oxygen therapy equipment
do not correspond with the settings of the Philips Respironics
SimplyGo Mini device�
•
Use only water-based lotions or salves that are oxygen compatible
during setup or use during oxygen therapy� To avoid the risk of fire
and burns, never use petroleum or oil-based lotions or salves�
•
If you notice any of the following, discontinue use and contact your
equipment provider (i�e�, Durable Medical Equipment (DME and
Home Care Providers (HCP):
-
unexplained changes in the performance of this device
-
unusual or harsh sounds
-
dropped or mishandled device or the power supply
-
water spilled into the enclosure
-
broken enclosure
•
Oxygen makes it easier for a fire to start and spread� Do not leave
the nasal cannula on bed coverings or chair cushions if the oxygen
concentrator is turned on, but not in use; the oxygen will make the
materials flammable� Turn the oxygen concentrator off when not in
use�
•
To ensure proper function and to avoid the risk of fire and burns:
-
Use only with Philips Respironics SimplyGo Mini AC power
supply�
-
Use only with Philips Respironics SimplyGo Mini batteries�
-
Use only approved SimplyGo Mini accessories�
4