Operating The Simplygo Mini Device; Power Options - Philips Respironics SimplyGo Mini Manual De Instrucciones

Operating the SimplyGo Mini Device

Power Options

Warning: Do not use the device without the battery installed and operating�
• To run the device on battery power, make sure the battery is properly
inserted and sufficiently charged� (The battery should be fully
charged the first time you use it�)
To run the device using AC power, first make sure you have a
•
battery installed� Then, follow these steps:
1� Connect the output cable of the AC Power Supply to the
SimplyGo Mini power input connector, aligning the green dots
on the power cord and device as shown below�
2� Connect the AC Power Cord's connector into the AC power
supply�
3� Connect the AC Power Cord's plug into an AC outlet installed to
meet national or regional electrical code�
To run the device using DC power from an automobile or other
•
motorized vehicle, make sure the battery is installed� Start the vehicle
and connect one end of the DC Power Cord to the device's power
inlet and the other end into the vehicle's DC electrical outlet�
SimplyGo Mini Power Cord Connection
When connecting the SimplyGo Mini
device to either an AC or DC power supply,
align the green dot indicators on the power
cord and the device as shown in the
illustration�
Note: DC power provided by the DC Power
Supply will also charge the battery
when the device is turned off or is
running on setting 1, 2, or 3� It may
not charge the battery when the device is running on setting 4 or 5�
Charging status can be verified with the battery icon on the Home
Screen�
SimplyGo Mini User Manual
Green Dots
13