System Overview; Pump And Accessory; Administration Set - Nestle Health Science Compat ella Instrucciones De Uso

EN
36
• Replace the Compat Ella
• Give particular attention to the risk of strangulation with cables and sets.
• Do not program Rate and Volume combinations that exceed 24 hours.
• Do not submerge the pump in water.
• Do not use in a dishwasher.
• To avoid electrical shock, never clean while the pump is on or plugged in.
•
Do not autoclave.
• The use of harsh cleaners/disinfectants and isopropyl alcohol, may damage the pump housing.
Precautions:
• Do not use in strong magnetic fields. e.g. MRI (Magnetic Resonance Imaging) environments.
• Ensure that the administration set is not connected to a patient when priming.
• Verify that the administration set is correctly installed, is connected to the nutrition container and is ready to prime.
• When programming a new therapy, make sure to clear the
• After starting a therapy, verify all therapy parameters (including rate, dose, and volume given this therapy).
• The battery capacity is an estimate. If you are unsure that enough capacity remains for your intended use, connect to the AC power until recharged.
• The advanced settings should only be adjusted by a qualified healthcare professional.

3. System Overview

3.1 Pump and Accessory (see pages 3-4)
Pump door
A
Door latch
B
Pump rotor
C
Keypad
D
AC power status light
E
Color display
F
3.2 Administration Set (see page 4)
ENPlus connector
S
Cassette
T
Note: Different versions of the administration sets are available. To obtain further information please contact your Nestlé Health Science
representative or go to www.nestlehealthscience.com.
administration set every 24 hours to maintain delivery accuracy and help prevent the growth of potential harmful contamination.
®
VOLUME GIVEN THIS THERAPY
Upstream pressure sensor
G
Downstream pressure sensor
H
Air sensor
I
Rubber foot pad
J
AC power connection
K
Pole clamp fitting
L
Medication port (shown : ENFit™ + Luer/Oral/ENLock)
U
Distal end (shown : ENFit™ + ENLock)
V
parameter.
Rear pump label with Quick Start Guide
M
Loudspeaker
N
Serial number label
O
Legal manufacturer label
P
AC power adapter
Q
Pole clamp
R