Operating Instructions; Step 1 - Prepare And Sort Laundry; Step 2 - Clean The Lint Screen - Haier GDE480BW Manual Para El Usuario

Status lights indicate the progress of an operating drying cycle.

OPERATING INSTRUCTIONS

STEP 1 - PREPARE AND SORT LAUNDRY

•
Check garment labels for manufacturers' drying instructions.
•
Where possible, turn pockets inside out for uniform drying.
•
Tie strings and sashes so they don't tangle.
•
Close zippers, snaps and hooks to avoid snagging.
•
Make sure buttons and ornaments on the clothes are high temperature resistant
and will not damage drum surface.
•
To avoid permanently setting stains or soils, check that all stains and soils have
been removed during the wash cycle. If not, wash them again.
•
To avoid entanglement and ensure easy removal, small articles should be
collected in a mesh bag before loading.
•
Separate fabrics that attract lint from fabrics that give o lint. Clothes prone to
linting should be turned inside out before being put into the dryer.

STEP 2 - CLEAN THE LINT SCREEN

1. Always make sure to clean the lint fi lter before starting a new load. It can be
removed by pulling on the handle of the lint fi lter located inside the dryer door.
2. Use your fi ngers to roll the accumulated lint o of the lint fi lter. Do not rinse or
wash the lint fi lter to remove lint.
3. Slide the lint fi lter back into place.
NOTES:
•
Do not operate the dryer without the lint fi lter in place. Without the fi lter,
tumbling garments could enter the exhaust system and cause damage to the
dryer and your clothes.
•
Lint buildup on the fi lter will restrict airfl ow and cause longer drying times.
Fire can occur if dryer is running without the lint filter.
Always operate the dryer with the lint filter in place.
24
WARNING