IMPORTANT SAFETY INSTRUCTIONS
Before beginning installation, carefully read these instructions. This will simplify
the installation and ensure the dryer is installed correctly and safely.
NOTE: The electrical service to the dryer must conform with local codes and
ordinances and the latest edition of the National Electrical Code, ANSI/
NFPA 70 or in Canada, CSA C22.1 Canadian Electrical Code Part 1.
NOTE: The gas service to the dryer must conform with local codes and
ordinances and the latest edition of the National Fuel Gas Code, ANSI
Z223.1 or in Canada, CAN/CGA B149.1.
NOTE: The dryer is designed under ANSI Z21.5.1 or ANSI/UL 2158 - CAN/
CSA C22.2 No. 112-97 (latest editions) for HOME USE ONLY. This
dryer is not recommended for commercial application such as restaurants,
beauty salons, etc.
For your safety the information in this manual must be
WARNING
followed to minimize the risk of fire or explosion or to
prevent property damage, personal injury or loss
of life.
Combustible materials, gasoline, and other flammable vapors and
liquids must not be stored near the dryer.
WHAT TO DO IF YOU SMELL GAS
1. Do not try to light any appliance
2. Do not touch any electrical switch. Do not use any phone in
your building.
3. Clear the room, building, or area of all occupants.
4. Immediately call your gas supplier from a neighbor's phone.
Follow the gas supplier's instructions.
5. If you cannot reach your gas supplier, call the Fire Department.
Installations must be performed by a qualified or licensed
contractor, plumber, or gasfitter qualified or licensed by the state,
province, or region where this appliance is being installed.
English
2