Tabla de contenido
Idiomas disponibles
Idiomas disponibles
All error and
warning
messages are
alternately shown
in line 1 of the
standard display!
NOTE
Display functions
Inlet
Analysis
valve
running
1 Limit value status displays (red/green)
The display 1 illuminates red if limit value 1 has been reached or
exceeded. The display 1 illuminates green if the value falls below
the limit value. The same principle applies to limit value 2 and
display 2. Behaviour is completely opposite with switch function 4.
With switch function 5 both displays illuminate green if the
measured value is within the range of LV1 and LV2.
2 Text display (4 lines)
Displays the current analysis result as well as all important
statuses and programming data.
2a = The current measured value for measuring point 1 (M1) and
2 (M2) is displayed in line 2 and 3.
Value exceeds the measuring range = ">" e.g. M1: >10 mgl/l
2b = The set limit values LV1 and LV2 are displayed in line 4
3 Alarm (red)
Indicates malfunctioning/error message or warning message.
4 Maintenance message (yellow)
Indicates current maintenance requests
5 Status display of the active instrument components (line)
Six displays indicate the current instrument and analysis status
Cancelling error messages/warning messages
Press
to acknowledge the message and, if necessary,
eliminate the cause of the fault.
Functions of the operating and display elements
Dosing
Outlet
message
valve
Analysis
Without
stop
function
21
Tabla de contenido
