Radio Mode; Adjusting The Tuner; Switching To Radio Mode - Blaupunkt Brisbane SD48 Instrucciones De Manejo

Ocultar thumbs Ver también para Brisbane SD48:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Adjusting the volume
When you have fi nished making your
changes,
press the MENU button >.
u
To exit the menu,
press the ESC button <.
u
Notes:
If the volume listened to is higher than
the set "TEL VOL" value, telephone
calls or navigation announcements
are played back at the volume lis-
tened to.
Using the volume control 6, you can
adjust the volume for telephone calls
and navigation announcements di-
rectly during the playback.
14

Radio mode

Adjusting the tuner

To ensure proper functioning of the tuner,
the device must be set for the region in
which it is being operated. You can select
between Europe (EUROPE), America (USA)
and Thailand (THAI). The tuner is factory-
set to the region in which it was sold. If you
experience problems with your radio recep-
tion, please check this setting.
The radio functions described in these op-
erating instructions refer to the tuner set-
ting USA.
Switch off the device by pressing but-
u
ton 4.
Hold the buttons 1 8 and DIS ;
u
pressed at the same time and switch on
the device again with the button 4.
The current setting is displayed.
Select your tuner region with the
u
button 2.
To save the setting and to exit the menu,
press the MENU button >.
u

Switching to radio mode

If you are in SD, USB, CD changer or AUX-IN
mode,
press the BND•TS button 5
u
or
press the SRC button 3 repeatedly
u
until "TUNER" appears on the display.
Radio mode
or
Tabla de contenido
loading

Este manual también es adecuado para:

7 648 002 310

Tabla de contenido