Festool MFK 700 EQ Manual De Instrucciones Original/Lista De Piezas De Repuesto página 12

Modular router MFK 700 EQ
Table of contents
1 Symbols
2 Technical data
3 Scope of delivery
4 Intended use
5 Safety instructions
5.1 General safety instructions
5.2 Machine-related safety instructions
5.3 Emission levels
6 Commissioning
7 Machine settings
7.1 Electronics
7.2 Changing the router table
7.3 Changing the routing tool
7.4 Changing the clamping collet
7.5 Adjusting the routing depth
7.6 Dust extraction
8 Working with the machine
8.1 Machine guidance methods
8.2 Aluminium processing
9 Service and maintenance
10 Accessories, tools
11 Disposal
12 Warranty
13 EU Declaration of Conformity
The specifi ed illustrations can be found at the
beginning an at the end of the operating instruc-
tions. The spare parts list appears at the end of
this operating manual.
1 Symbols
Warning of general danger
Risk of electric shock
Wear a dust mask!
Read the Operating Instructions/Notes!
Advice or tip
2 Technical data
Power consumption
Rotational speed (no load)
Tool holder
(optional: 6 mm, 1/4"(6.35 mm))
Max. routing tool diameter
Dust extractor connection diameter
Weight
Safety
3 Scope of delivery
[1-1] MFK 700 with large surface router table
[1-2] Side stop with guide rods and fi ne ad-
juster
[1-3] Extraction hood for large surface router
table with extractor connector
[1-4] Router table for edge veneer with feeler
roller and extraction hood (only in SET
scope of delivery)
4 Intended use
The MFK 700 EQ is designed for routing wood,
plastic and similar materials.
The user bears the responsibility for damage and
accidents caused by improper use.
5 Safety instructions
5.1 General safety instructions
WARNING! Read all safety warnings and
all instructions. Failure to follow the warn-
ings and instructions may result in electric shock,
fi re and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
5.2 Machine-related safety instructions
- Ensure that the router bit is seated fi rmly and
that it runs perfectly.
- The clamping collet and locking nut must show
no signs of damage.
- Only use tools that meet standard EN 847-1.
All Festool routing tools fulfi l these require-
ments.
- The maximum rotational speed specifi ed on the
tool must not be exceeded and the rotational
speed range must be observed.
- Do not use cracked or deformed router bits.
- Do not clamp tools with an unsuitable shank
diameter in the clamping collet.
12
720 W
10000 - 26000 rpm
8 mm
26 mm/1"
27 mm
1.9 kg
/II