Operation; Energy Saving Tips; Using The Minibar; Using The Temperature Setting Function - Dometic DM 50NTE Instrucciones De Montaje

Operation

Assembling the lock (fig. c, page 8)
➤ Put the new lock cover (A 1) into place.
➤ Put the decor (B 1) into the decor frame.
➤ Screw (B 2) the decor frame (B 3) onto the door.
➤ Install the door lock (C 1).
➤ Install the lock catch (D 1) in the cabinet.
Assembling the drawer (fig. d, page 8)
➤ Push the gasket (1) on the decor frame (2).
➤ Screw the door handle (4) onto the door.
➤ Push the plugs (3) on the screws of the door handle (4).
➤ Push the drawer into the cabinet.
7 Operation
7.1

Energy saving tips

•
Do not open the cooling device more often than necessary.
•
Do not leave the cooler unit open for longer than necessary.
7.2

Using the minibar

The minibar starts cooling when connected to power. During normal operation the
Power Status LED is glowing. If an error occurs the Error LED is blinking (see chapter
"Troubleshooting" on page 19).
7.3

Using the temperature setting function

The minibar is set by default to a cooling temperature of 7 °C (44.6 °F) at an ambient
temperature of 25 °C (77 °F).
You can use the setting button (fig. 4 4, page 3) to set the cooling temperature to
one of three values (5 °C, 12 °C and 7 °C (41 °F, 53.6 °F and 44.6 °F)).
Thereby the temperature will be changed in the order 5 °C ... 12 °C ... 7 °C ... 5 °C
(41 °F ... 53.6 °F ... 44.6 °F ... 41 °F) etc.
18
DM50NTE
EN