3. Cleaning
4. Positioning the appliance
4.1. Installation instructions
IMPORTANT
Please follow the installation details below carefully
Guarantee is valid for products installed as described only.
1. The refrigerator must be level both directions
2. There should be 20 mm clearance to the wall
3. Ventilation must be provided as shown in alternatives
A, B, C or D (fig 2-3)
4. The ventilation duct must at least measure 105 mm x
the width of the refrigerator
5. Only the entire cooling unit must project into the duct
as shown
6. Air passing through the duct must not be preheated
by any source of heat
7. Ventilation grills, if used, must have an free openings
of at least 200 cm
each
2
During installation, please ensure the mains plug is
accessible at all times.
5. Using the appliance
5.1. Initial operation
5.2. Temperature regulation
G