Installation; Prescribed Installation Method - Dometic COOLAIR SP 950C Instrucciones De Montaje

Installation

6 Installation
A
NOTICE!
The parking cooler may only be installed by qualified personnel from a
specialist company. The following information is intended for specialists who
are familiar with the guidelines and safety precautions to be applied.
6.1

Prescribed installation method

The compressor unit (fig. 1 1, page 3) is attached to the firm and straight rear
panel of the cab or by means of a firm fastening frame.
I
NOTE
The connection line (fig. 1 3, page 3) can only be installed after fitting the
evaporator unit and the compressor unit.
The parking cooler with rear panel evaporator unit consists of the following
components (fig. 1, page 3):
• CoolAir SP950C/SPX1200C compressor unit (1)
• CoolAir SP950I/SPX1200IC rear panel evaporator unit (2) with connection
line (3)
The parking cooler with roof evaporator unit consists of the following
components (fig. 1, page 3):
• CoolAir SP950C/SPX1200C compressor unit (1)
• CoolAir SP950T/SPX1200T roof evaporator unit (4) with connection line (3)
14
CoolAir SP950C/SPX1200C
EN