Switching The System Off; Maintaining And Cleaning The Dc Kit - Dometic DC-Kit PP 12 Instrucciones De Montaje

Maintaining and cleaning the DC kit

• Make sure that none of the housings and cables are not damaged and that all the
insulation is intact.
• Compare the existing supply voltage against the technical data.
• Do not insert any fingers or objects into component openings.
Stationary mode: AC mains supply mode
The system is supplied from the AC mains.
Driving mode: power supply from the battery
I
NOTE
See also: chapter "How the DC kit functions" on page 16.
➤ Switch on the inverter using the remote control.
➤ Use the air conditioning unit as described in the operating manual.
8.2

Switching the system off

➤ First of all, switch off the air conditioning unit.
➤ If there are no more consumer units that need power, switch off the inverter using
the remote control.
9 Maintaining and cleaning the DC kit
A
NOTICE!
Do not use sharp or hard objects or cleaning agents for cleaning as these
may damage the product.
I
NOTE
Observe the maintenance and cleaning instructions in the operating
manuals of the individual components.
➤ Clean the charging current distributor with a damp cloth from time to time.
➤ Check the power supply lines for abrasion or defects regularly.
➤ Have the system checked regularly by a specialist company.
➤ If you find any faulty fuses, have the system checked by a specialist company.
24
DC-Kit PP12, DSP-T12/24
EN