Sony FWD-S42E1 Manual De Instrucciones página 54

7 ID MODE (ON/0-9/SET/C/OFF) buttons
8
9
0
qa DISPLAY button
qs OPTION 1 button
qd HD15 button
qf 1 STANDBY button
Note
You cannot use the HDMI button, the OPTION 2 button, the VIDEO button, the S VIDEO button and the
display.
14
GB
You can operate a specific display without affecting other displays
installed at the same time.
• ON button: Press to show the "Index Number" on the screen.
• 0-9 button: Press to enter the "Index Number" of the display you want
to operate.
• SET button: Press to set the input "Index Number".
• C button:
Press to clear the input "Index Number".
• OFF button: Press to return to the normal mode.
See page 16.
(contrast) +/– button
Adjusts the picture (contrast) level.
(volume) +/– button
Press to adjust the volume.
(muting) button
Press to mute the sound. Press again to restore sound.
Press to display the currently selected input, the type of the input
signal and the "Aspect" setting on the screen. Press again to hide
them. If this displayed information is left undisturbed for a short time,
it will disappear automatically.
When an optional adaptor is installed, selects an input signal from the
equipment connected to the optional adaptor.
If the installed optional adaptor has multiple input connectors, each
press of the button toggles between the input signals.
Press to select the input signal of the HD15 (RGB/COMPONENT)
connector. The RGB signal or component signal is selected
automatically or manually in accordance with the menu settings.
Press to change the display to the standby mode.
button on this