Satcr Function; Using The Alphanumeric Keyboard - Promax TV EXPLORER II Manual De Instrucciones

USER'S MANUAL. TV EXPLORER II/II+
5.24

SATCR function

By means of function SATCR it is possible to control the devices of a TV
installation satellite that are compatible with the SatCR
Router), which allows to concentrate manifold down frequencys (slots) by an only cable.
By this way each user using a slot can tune and decode any signal present in the
satellite.
In order to select the SATRC function, press the DiSEqC key [21] from frontal
panel, and using the rotary selector [1] activate the SATRC option. In the display are the
configuration options that users can modify: slot selection, number of slots, device
address, Frequency sep, pilot signal activation, and finally the frequencies corresponding
to each slot.
0 20
FREQ:
DL-Ku:
CH:
When activating the Enable Pilots options, the SatCR device located in the
headend emits a pilot signal with constant level for each down frequency (slot). This
function facilitates the verification and identification for different satellite channels that
are available in the installation. The SatCR technology is being developed and tested in
many countries.
5.25

Using the alphanumeric keyboard

In order to enter numerical data or text the built in alphanumeric keyboard must be
used. Many keys incorporate a number and several letters like the telephone keypad.
11
SatCR is a trademark of STMicroelectronics.
12/2013
SATCR
DiSEqC
» SELECTED SLOT:
» NUMBER OF SLOTS:
40 60 80
» ADDRESS:
1300.02 MHz » LEVEL:
» STEP:
11900.0 MHz C/N:
» ENABLE PILOTS:
2
950.05 MHz
» SLOT 1:
1419.96 MHz
» SLOT 2:
EXIT
Figure 66.- SatCR command screen.
11
technology (Satellite Channel
1
2
100 120
0
30.0 dBµV
1 MHz
7.6 dB
OFF
Page 89