Configuration - Promax TV EXPLORER II Manual De Instrucciones

USER'S MANUAL. TV EXPLORER II/II+
6776 3388
0
t -
On the X-axis the time variables references are showed. On the right corner the
capturing elapsed time is displayed. On the center the T.Span is showed, it defines the
seconds that will be displayed on the screen. For example, if the T.span is 60s, therefore
the last 60s captured, will be displayed on the screen. On the left corner the t variable is
used to move the cursor at any time position regards to the initial capture time. To adjust
the T.Span or t, use the variable knob or the cursor.
On the Y-axis are placed the carriers. In this axis the initial and final carriers are
showed and depend on the 8k/4k/2k mode.
Next to the final carrier the number of carrier and the MER level where the cursor
are placed is showed. Use the variable knob or the cursors and adjust the carrier and
temporal position.
5.17.2.1 MEROGRAM Configuration
Before the capture begins the options must be configured. Press the key,
and the option menu will be displayed.
Temporal reference
Begin:
The captured information will be showed on the display with initial
reference 0 s and it is placed on the left edge. In this option the screen
is not update with news acquisitions unless the cursor is moved at the
end of the capture. Using the temporal position, the cursor can be
move through the entire file and the display will be updated according
to the new temporal reference.
12/2013
- - - CA:
60
30 s. T.span:
Figure 52.- Initial screen.
69
/ 0 s.
[17]
Page 73