Promax TV EXPLORER II Manual De Instrucciones página 126

STEP 3.- To carry out a complete channel band exploration
1.
Select the frequency band to explore
2.
Activate the exploration process by holding
3.
Press [10] key to visualise the channels detected and
between channels from detected channels list.
STEP 4.- To carry out the tuned channel identification
1.
Select the frequency band to explore
2.
Activate the identification process pressing once on
3.
Press [10] key to visualise the signal detected from channel or frequency
identified or [13] to monitor the corresponding spectrum.
NOTE: In the case that is desired to explore or identify DVB-C signals it is
necessary to select previously DVB-C standard as digital signal identifier
through [22] PREFERENCES menu.
STEP 5.- Making measurements
1.
Select the channel or frequency
[1].
2.
Press [12] key to select the type of measurement until on screen appears the
corresponding measurement.
Page 16
USER'S MANUAL. TV EXPLORER II/II+
[14] (terrestrial or satellite).
[25] key pressed.
[14] (terrestrial or satellite).
[25] key.
[24] to measure by means of the rotary selector
[6] to change
12/2013