Promax TV EXPLORER II Manual De Instrucciones página 192

NOTE:
The symbol
instrument has detected a saturation condition for analogue signals in
the currently channel on tune.
This symbol also appears, when the colour subcarrier signal (Burst)
does not contain information and therefore the images are shown in black
and white.
If it is a digital television signal (DTV) on screen appears, for about some seconds,
the following parameters: channel number or satellite name, frequency, active channel
plan and satellite downlink frequency. The following data box shows the video data: type
of video coding (MPEG-2 or MPEG-4), video bit rate, video program identifier (VPID)
and the TS identifier (TSID). One other data box contains audio information: type of
audio coding (MPEG-1, MPEG-2 or AC-3), audio bit rate, audio program identifier (APID)
and language (e.g. spa). The last box located in the same column shows the network
data: network name and/or satellite orbital position, service name, netwok identifier (NID)
and service identifier (SID).
On the left column appears the type of DVB signal, a window showing the signal
decoded and finally a data box stating if the emission is encrypted or free (SCRAMB or
FREE), when the service supports interactive TV (MHP, i.e. Multimedia Home Platform)
and when is inserted a CAM module into the TV EXPLORER II + the indication (CAM)
appears.
DVB-T
DTV OSD: ON
(FREE)
MHP
Figure 60.- Digital channel monitoring.
Page 82
USER'S MANUAL. TV EXPLORER II/II+
in the upper corner of the screen indicates that the
CCIR C:
F: 794.00 MHz DL:
VIDEO:
MPEG-2 2797 kb/s
MP@ML 720x576i 4:3
111 TSID: 97
VPID:
AUDIO:
MPEG-1 L-2 192 kb/s
112 LANGUAGE:
APID:
NETW.:
12.9 E
VTV 1
NID: 12674 SID:
61
7940
25Hz
en
801
12/2013