Promax TV EXPLORER II Manual De Instrucciones página 188

Immediately, it will start scanning in order to detect whether there are echoes or
not. If it finds any echo it will be shown on the screen. At the bottom of the screen you
can see the progress of the finding done as a percentage.
During the scan you should realise that the key RUN has changed and has been
renamed as RESTART. This mean that you may restart a new finding anytime before
last finding had finished. To do it, press the rotary knob on RESTART.
If during scanning the instrument is unlocked, the screen will show a warning
message of the incident.
Once the scanning is over, you will see the detected echoes on the screen
(Figure 57.-). Now you can analyse them in more detail.
0
-10
-20
-30
DELAY:
COMPLETE
To navigate between the detected echoes:
1. Place the cursor
2. Press the rotary knob. Then, the vertical cursor will placed on the first echo
(Figure 58.-).
3. Once the cursor is on the first echo, you should see at the bottom of the
screen the delay and distance measurements of the echo with regard to the
carrier.
4. Press the rotary knob again to switch to the next echo.
Page 78
USER'S MANUAL. TV EXPLORER II/II+
0.0 us 0.0 km ZOOM: x1
FIND ECHO
Figura 57.- ECHOES found.
[6] on the menu option "FIND ECHO".
RUN
12/2013