Safety Information; Unpacking And Inspection - PeakTech 1650 Manual De Instrucciones

Cleaning the cabinet
Clean only with a damp, soft cloth and a commercially available
mild household cleanser. Ensure that no water gets inside the
equipment to prevent possible shorts and damage to the
equipment.

1.1. Safety information

Caution! Refer to accompanying documents.
Caution! Risk of electric shock.
Equipment protected throughout by double insulation
(class II)
Alternating current
Direct current
Ground
However, electrical noise or intense electromagnetic fields in the
vicinity of the equipment, may disturb the measurement circuit.
Measuring instruments will also respond to unwanted signals that
may be present within the measurement circuit. Users should
exercise care and take appropriate precautions to avoid
misleading results when making measurement in the presence of
electromagnetic interference.
2. Introduction

2.1. Unpacking and inspection

Upon removing your new digital clamp meter from its packing, you
should have the following items:
Digital clamp meter, Test lead set; 9-V battery (installed in meter),
carrying case, Instruction manual, Thermocouple
If any of the above items are missing or are received in a
damaged condition, please contact the distributor from whom you
purchased the unit.
-22-