Comelit 1454 Manual De Uso página 39


Self-ignition:
Tick this option to program the self-ignition of any camera connected to
the system (up to a maximum of 9 cameras).
Adding a camera
1. In the address window, select an available slot.
2. Click on the button Modify.
3. In the "Address" field, enter the ViP address of the external unit or camera
module with which you wish to associate the "Self-ignition" function.
4. Select the camera from which you wish to receive an image.
5. Click
Editing a camera
1. In the address window, select the camera you wish to edit (the field will be
highlighted in green).
2. Click on the button Modify.
3. In the "Address" field, edit the ViP address of the external unit or camera
module with which you wish to associate the "Self-ignition" function.
4. Select the camera from which you wish to receive an image.
5. Click
Deleting a camera
1. In the address window, select the camera you wish to delete (the field will be
highlighted in green).
2. Click on the button Disable.
3. Click
tion.
If more than one camera is set for the self-ignition function (MAX. 9), every time the button
is pressed, the software will cycle through the available options.
For Kit 8501, 8501HIM, 8501I, 8501IM, 8501U, 8503, 8504 and 8504H, the
"auto-activation" function (
00000100.
to save the settings, or
to save the changes, or
to confirm camera deactivation; click
) is set by default to call the porter with ViP address
to cancel the settings.
to cancel the changes.
to cancel camera deactiva-
38