DM50C
7
Operation
7.1
Energy saving tips
• Do not open the cooling device more often than necessary.
• Do not leave the cooler unit open for longer than necessary.
7.2
Using the minibar
The minibar starts cooling when connected to power. During normal operation the
Status LED is glowing. If an error occurs the Error LED is blinking (see chapter "Trou-
bleshooting" on page 17).
SLEEP mode
In "SLEEP" mode the compressor stops running, and the minibar stops cooling.
"SLEEP" mode will only last 10 hours. The minibar will automatically resume normal
cooling mode after 10 hours.
If the power supply is disconnected during the "SLEEP" mode and then resumed,
the status of the "SLEEP" mode will not be affected.
Entering "SLEEP" mode:
➤ Press briefly the setting button (1).
✓ The internal lamp (3) turns off, the status LED (2) is still on.
The minibar stops cooling.
EN
3
E
P
Press"SET"to enter SLEEP mode
2
1
SET
Operation
15