en
ENGLISH
f
12. Accessories
Only use original Metabo battery packs and Metabo
accessories.
Use only accessories that fulfil the requirements
and specifications listed in these operating
instructions.
If you need any accessories, check with your
dealer.
I Chargers: ASC 145 , ASC 55, etc.
J Battery packs with different capacities.
Purchase only battery packs with the voltage
matching your device: 5.2 Ah (6.25592);
4.0 Ah (6.25591); 3.0 Ah (6.25594); etc.
K Suction hose (6.30176)
L Nozzles: suction nozzle (6.30320); crevice
nozzle (60.30323)
M Flat pleated filter (6.30172)
N Flat pleated filter (HEPA) (6.30175)
O Fleece filter bag (6.30173)
P Dolly (6.30174)
See www.metabo.com or the catalogue for a
complete range of accessories.
13. Repairs
Repairs to devices must be carried out by qualified
electricians only!
Use only original Metabo spare parts.
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. See
www.metabo.com for addresses.
You can download a list of spare parts from
www.metabo.com.
14. Environmental Protection
Do not allow battery packs to come into contact with
water!
Protect the environment, and do not dispose
of power tools and battery packs with house-
hold waste. Observe national regulations on
separated collection and recycling of disused
machines, packaging and accessories.
Discharge the battery pack in the power tool before
disposal. Prevent the contacts from short-circuiting
(e.g. by protecting them with adhesive tape).
15. Technical Specifications
Explanatory notes on the specifications on page 2.
Changes due to technological progress reserved.
K
= dust class. As per EN 60335-2-69.
Lxwxh=External dimensions
U
= Mains voltage
S
= Suction hose diameter
Ø
S
= Suction hose length
L
p
= max. vacuum (at the hose)
U1
p
= max. vacuum (at the blower)
U2
A
= Filter area
16
V
= Air flow rate (at the hose)
l/min1
V
= Air flow rate (at the blower)
l/min2
D
= max. flow rate (at the hose)
max1
D
= max. flow rate (at the blower)
max2
V
= max. container volume
Typical A-effective perceived sound levels:
L
= Sound pressure level
pA
L
= Acoustic power level
WA
K
, K
= Uncertainty
pa
WA
During operation the noise level can exceed 80
dB(A).
Wear ear protectors!
Measured values determined in conformity with EN
60704.
Direct current
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).