Installing The Holder For The Laptop/Tablet; Installing The Alignment Aid - Bosch SCT 17 Instrucciones De Servicio

en | 12 | SCT 17
1
2 2
3
(1) Camera
(2) Camera cylindrical pins
(3) Included screw
8. Insert the USB connecting cable
(2)
of the camera bracket.
1
2
(1) USB connecting cable
(2) Groove on the camera bracket
---Separator---
3.2 Installing the holder for the laptop/
tablet
(1)
1. Remove the 4 screws
mechanism.
1 1 1 1
(1) 4 screws
2. Screw in the 4 included screws
for the laptop/tablet can be hung from them.
(2)
3. Use the notches to hang the holder for the lap‐
(1)
top/tablet from the 4 screws already screwed in
(3).
4. Tighten the screws (3).
1 689 989 391 | 2018-08-01
(1)
into the groove
from the height adjustment
(3)
until the holder
1
3 3 3 3
(1) Holder for laptop/tablet
(2) Notches on holder for laptop/tablet
(3) 4 included screws
---Separator---
3.3

Installing the alignment aid

(1) on the base plate (2).
1. Secure the bar
1
2
(1) Bar
(2) Base plate
(1)
2. Use the star knob to secure the bar on the screw
(2).
1
2
(1) Star knob
(2) Screw
(1)
3. Slide the screw plate
(2).
1
2
(1) Screw plate
(2) Rectangular bar
4. Position the rectangular bar on the base plate in
such a way that the lower mount for the reference
(1) faces the star knob (2).
board
2 2 2 2
into the rectangular bar
Robert Bosch GmbH